Every panel is printed just for your wall, so a few careful measurements make all the difference. Here is exactly how I would measure at home.
Measure the height
Measure from the top of your baseboard to the ceiling at the tallest point of the wall. On a sloped or vaulted ceiling, use the highest point. Choose the panel height that covers it, with a few extra inches for trimming.
Measure the width
Measure the full width of the wall, straight across any doors and windows. Don't subtract the openings, the pattern still needs to flow around them.

Count your panels
Every panel is 19 inches wide. Divide your wall width in inches by 19 and round up.
Order the whole wall at once
Order every panel for one wall at the same height, in one order. Each order is its own print run, so color can shift slightly between runs and the pattern may start at a different point. If you are on the fence, add one extra panel.
- Your panels arrive labeled in order, so the pattern lines up as you hang them.
- Some patterns repeat wider than 19 inches, so follow the labeled order rather than matching each seam by eye.
- Not sure about color or scale yet? Start with a $5 sample and see it in your own light.
